Click here for the Linux kernel 3. Obviously the card needs to be installed in the PCI slot of your machine. The current Hauppauge PPA has support for the following tuners: You will need the latest version of nVidia Shield firmware 5. After you’re back up, you should be able to run this and see the firmware has loaded:
|Date Added:||25 April 2004|
|File Size:||40.20 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Support: Running WinTV TV tuners and HD PVR 2 under Linux
Module saa is in use. So there is no need to compile your own kernel. Test the saa driver Hauppaufe saa driver should be automatically loaded, you can check this with: Analogue recording I specifically wanted to record from the analogue input.
Hauppaue you’d like to see the latest directions from the GIT repository, click here. You will need the latest version of nVidia Shield firmware 5.
Linux support for Colossus 2 is through a user mode application. Here is a video on how to install the drivers and how to use Kaffeine www. Xenial available here http: After you’re back up, you should be able to run this and see the firmware has loaded: Raspbian can be downloaded from https: OpenELEC can be downloaded from http: Sign up using Email and Password.
Which does not work for me on You will also need the firmware which is not included with Raspbian Jessie. Obviously the card needs to be installed in the PCI slot of your machine.
You will also need the firmware which is not included with Raspbian Jessie. Sign up using Facebook. Post as a guest Name.
Hauppauge Support | Linux
Firstly, TVTime was really helpful for viewing the analogue input to the tuner, so install that with:.
1. Physically install the card
I also like to turn of the PSU at its switch, but leave the cable itself plugged in. It took me a little bit of messing around to finally figure this out, so I’ll share the command that worked for me with the HVR Make sure you turn it off before you do this.
It will take up a lot of disk space mine used about 1 GB per minute. It seems it was removed from the repositories. See this page for instructions. Haupppauge is kinux video on how to install the drivers and how to use Kaffeine.